Construction and finish
This panel is the inorganic precoated tongue-and-groove panel listed in the company product range. Its substrate is calcium silicate board. The product page describes the surface process as follows: the surface is repeatedly polished, treated for permeability and waterproofing, then roller-coated or spray-coated with two layers of ultraviolet fluorocarbon paint, cured through eleven ultraviolet curing passes, lined with a light steel runner and bonded with foam adhesive under heat. That process description is quoted here from the product page, which was checked directly before this page was written, and it is attributed to the product page rather than presented as an independent test result.
The finish that results is described in the company product profile as antibacterial, mould-resistant and easy to clean, for laboratory and healthcare use. Those three words are the product profile's own description of the panel's intended use character. They are not presented here as measured test values, and no antibacterial test figure, mould-resistance figure or cleaning-test figure is published on this page, because the company record does not give such figures for public listing. If your project specification requires a measured figure, raise it at enquiry stage for this exact panel.
Joint and seam
The panel is installed as a tongue-and-groove system with a middle-aluminium style jointing approach, and the product page describes the result as seamless installation with high flatness. The product page states that the flat seam can be controlled to a minimum clearance within 1.0 mm, and that the upper and lower grooves give high levelling and flatness. Both figures — the 1.0 mm seam clearance and the eleven curing passes — were verified against the product page text before publication, and they are the only dimensional and process figures published on this page for this panel.
The product page also states that installation with this jointing approach is described as saving costs by 3 percent. That percentage is the product page's own claim, attributed here to the product page, and it is not presented as a measured saving for any specific project. Actual installation cost depends on the room layout, the wall runs and the site conditions, so it should be confirmed for your own project rather than assumed from the product page wording.
Applications
The company product profile places this panel for laboratory and healthcare use, and the product page describes it as suitable for hospital operating rooms, cleanroom passages, wards and healthcare buildings. The antibacterial and easy-clean character described above is the reason for that placement: rooms that are cleaned frequently, and rooms where hygiene matters most, benefit from a surface that is easy to clean and from joints that do not trap dirt.
The panel's face is a coated finish rather than a plain steel face, so surface selection for this panel is a finish selection as well as a colour selection. Confirm the finish and colour for each room with the panel order, and confirm the joint pieces included in the delivery scope, so the wall arrives as a system rather than as loose panels. The structure diagram on this site for this panel family is captioned as a structure exploded diagram, not as a photograph of the finished face, because the diagram shows layers rather than the finished surface.
Installation and maintenance
Installation follows the tongue-and-groove jointed system: panels are joined in sequence, grooves are levelled, and seams are controlled to the tight clearance described above. The company service profile offers installation guidance, video guidance and, where necessary, on-site support. For this panel, raise installation support in the enquiry if your site team has not installed a jointed precoated system before, and confirm the support scope before ordering.
Maintenance follows from the finish: a coated, easy-clean surface with tight seams is maintained by regular cleaning of the face and the joint, without the joint becoming a dirt trap. The maintenance guide on this site covers the routine in more detail, and the antibacterial and easy-clean selection page places this panel alongside the other surface options for hygiene-sensitive rooms. For ordering, send the room list and wall runs, confirm the panel, joint and finish for each room, and please confirm minimum order quantity and lead time before ordering. Certificates are available upon request.
Send your wall layout and room list — confirm this panel, its joint and its finish for each laboratory or healthcare zone before you order.
Send a wall-system enquiryPlease confirm minimum order quantity and lead time before ordering.